Filament PVA Nature 0.5kg
- This is a material that acts as a support and it dissolves in water. It takes about 75 minutes at 23℃
Specifications
Filament Type PVA
Diameter 1.75mm
Printing temperature 190~220℃
Printing speed 60~90mm/s
Layer height 0.2mm
Bed temperature Not Required
Raft Not Required
Weight 0.5Kg
Density 1.25±0.05g/cm3
MFR(190℃,2.16Kg) 2~4g/10min
Water absorption(equilibrium in water,23℃) ——
Tensile Strength ≥10MPa
Flexural strength ≥15MPa
Tensile modulus ≥190MPa
Izod notched impact strength(IZOD,23℃) ≥16J/m (ASTM D256)
Elongation @ Break ≥11.0%
Heat Distortion Temperature ≥55℃
Diameter tolerance ±0.08mm
Roundness deviation ≤0.08mm
Color netural
6970152950727EAN: